IKEA SKINANDE 10299387 User Manual download pdf (Page 10)

What to do if you want to stop using multi-

tablets

Before you start to use detergent, salt and

rinse aid separately do the following

procedure.

1. Deactivate the Multitab option.

2. Set the highest level of the water

softener.

3. Make sure that the salt and rinse aid

containers are full.

4. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

5. When the programme is completed,

adjust the water softener according to

the water hardness in your area.

6. Adjust the released quantity of rinse aid.

Settings

Programme selection mode and user

mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings can

be changed:

• The level of the water softener according

to the water hardness.

• The activation or the deactivation of the

acoustic signal for end of programme.

• The deactivation of the rinse aid

dispenser when you want to use the

Multitab option without rinse aid.

These settings will be saved until you

change them again.

How to set the programme selection mode

The appliance is in programme selection

mode when the programme indicator

is on and the display shows the

programme duration.

When you activate the appliance, usually it

is in programme selection mode. However,

if this does not happen, you can set the

programme selection mode in the following

way:

Press and hold simultaneously

and until the appliance is in programme

selection mode.

The water softener

The water softener removes minerals from

the water supply, which would have a

detrimental effect on the washing results

and on the appliance.

The higher the content of these minerals, the

harder your water is. Water hardness is

measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water in

your area. It is important to set the right

level of the water softener to assure good

washing results.

Water hardness

German degrees

(°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener level

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

ENGLISH 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments