IKEA MEDELSTOR User Manual download pdf (Page 12)

Whether you use a standard detergent or

multi-tabs (with or without salt), set the

proper water hardness level to keep the

salt refill indicator active.

Multi-tabs containing salt are not

effective enough to soften hard

water.

How to set the water softener level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators , , and

flash and the display is blank.

2. Press .

• The indicators , and

are off.

• The indicator still flashes.

• The display shows the current setting:

e.g. = level 5.

3. Press repeatedly to change the

setting.

4. Press the on/off button to confirm the

setting.

The rinse aid empty notification

The rinse aid helps to dry the dishes without

streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

When rinse aid chamber is empty, the rinse

aid indicator is turned on notifying to refill

rinse aid. If the drying results are

satisfactory while using multi-tablets only, it

is possible to deactivate the notification for

refilling rinse aid. However, for best drying

performance, always use rinse aid.

If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse aid empty

notification

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators , , and

start flashing and the display is blank.

2. Press .

• The indicators , and are

off.

• The indicator still flashes.

• The display shows the current setting.

–

= rinse aid empty notification

activated.

–

= rinse aid empty

notification deactivated.

3. Press

to change the setting.

4. Press on/off to confirm the setting.

Acoustic signals

Acoustic signals sound when a malfunction

of the appliance occurs. It is not possible to

deactivate these acoustic signals.

There is also an acoustic signal that sounds

when the programme is completed. By

default, this acoustic signal is activated and

it is possible to deactivate it.

In addition, an acoustic signal will sound

before the AutoOpen will open the door.

This acoustic signal stops only if AutoOpen

is deactivated.

When pressing the main switch to turn on

the dishwasher, it makes a short beep

sound. The beep is activated by default, but

it is possible to deactivate it together with

the end of programme acoustic signal.

ENGLISH

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Comments to this Manuals

No comments