IKEA MEDELSTOR User Manual download pdf (Page 16)

5

If the programme

has a prewash

phase, put a small

quantity of

detergent on the

inner part of the

appliance door.

While using multi-tablets, which contain salt

and rinse aid, it is not necessary to fill the

salt container or the rinse aid dispenser.

• Adjust the water softener to the lowest

level.

• Set the rinse aid dispenser to the lowest

position.

Setting and starting a programme

The Auto Off function

This function decreases energy consumption

by automatically deactivating the

appliance when it is not operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has not

started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press repeatedly or until

the display shows the number of the

chosen programme. The display shows

the programme number for

approximately 3 seconds and then

shows the programme duration.

4. Set the applicable options.

5. Close the appliance door to start the

programme.

Starting a programme with delay start

1. Set a programme.

2. Press

repeatedly until the display

shows the delay time you want to set

(from 1 to 24 hours).

The delay indicator comes on.

3. Close the appliance door to start the

countdown.

While a countdown is running it is possible

to increase the delay time but not to change

the selection of the programme and

options.

When the countdown is completed, the

programme starts.

Opening the door while the appliance

operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the door,

the appliance continues from the point of

interruption.

If the door is opened for more

than 30 seconds during the

drying phase, the running

programme ends. It does not

happen if the door is opened by

AutoOpen function.

ENGLISH 16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Comments to this Manuals

No comments