IKEA MEDELSTOR User Manual download pdf (Page 11)

• Activation or deactivation of the rinse

aid empty notification.

• Activation or deactivation of AutoOpen.

As the appliance stores the saved

settings, there is no need to configure it

before every cycle.

How to set the programme selection mode

The appliance is in programme selection

mode when, after the activation, the display

shows the number of programme .

The display shows the programme duration

after a few seconds.

After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode the

following way:

1. Press and hold RESET until the

appliance is in programme selection

mode.

The water softener

The water softener removes minerals from

the water supply, which would have a

detrimental effect on the washing results

and on the appliance.

The higher the content of these minerals, the

harder your water is. Water hardness is

measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water in

your area. It is important to set the right

level of the water softener to assure good

washing results.

Water hardness

German degrees

(°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener level

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Comments to this Manuals

No comments