IKEA MEDELSTOR User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
Problem and alarm code Possible cause and solution
The salt indicator continues
to stay on after the replen-
ishment of the salt container
If after 3 or 4 programmes, the salt indicator continues to
stay on, contact an Authorised Service Centre.
This can occur when you are using salt that needs more
time to dissolve.
There is no unwanted effect on the performance of the
appliance.
Refer to "Before first use",
"Daily use", or "Hints and tips"
for other possible causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results.
Refer to "Daily use", "Hints and tips" and basket
loading leaflet.
Use more intensive washing programmes.
Clean spray arm jets and filter. Refer to "Care and
Cleaning".
Poor drying results.
Tableware has been left for too long inside a closed
appliance.
There is no rinse aid or the dosage of rinse aid is not
enough. Set the rinse aid dispenser to a higher level.
Plastic items may need to be towel dried.
For the best drying performance activate the option
DryPlus and set AutoOpen.
We recommend to always use rinse aid, even in com-
bination with multi-tablets.
There are whitish streaks or
bluish layers on glasses and
dishes.
The release quantity of rinse aid is too much. Adjust
the rinse aid level to a lower level.
The quantity of detergent is too much.
There are stains and dry wa-
ter drops on glasses and
dishes.
The released quantity of rinse aid is not sufficient. Ad-
just the rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
ENGLISH 22
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments