IKEA RDW60 User Manual download pdf (Page 20)

Caution! Do not use connection hoses

from an old appliance.

Caution! If you connect the appliance to

new pipes or pipes that are not used for

a long time, we recommend to run the water

for some minutes before you connect the inlet

hose.

Aqualock inlet hose

The inlet hose is a high pressure resistant. It can

hold pressure at maximum 6 MPa. From ex-

ternal the inlet hose has a sheathing against

eventual damages. If the inner hose breaks,

the water that is in the hose will became dark.

You can see it across the special transparent

sheathing. Turn off the water tap immediately

and contact the After Sales Service.

A

B

The aqualock inlet

hose is installed with

a safety device to

prevent accidental

loosening. To discon-

nect the hose:

• Press the lever ( B ).

• Turn the retaining

ring ( A ) anticlock-

wise.

Turn the inlet hose to

the left or the right to

suit the installation.

Tight the locknut cor-

rectly to prevent wa-

ter leaks.

If you use a inlet

hose extension

the total reached

length must be no

longer than 4 metres.

Drain hose

A

If you connect the

water drain hose to a

water trap under the

sink, remove the

plastic membrane

(A). If you do not re-

move the membrane,

remaining food can

cause a blockage in

the drain hose spigot.

Caution! Make

sure that the

water couplings are

tight to prevent wa-

ter leakage.

Electrical connection

Warning! The manufacturer is not

responsible if you do not follow these

safety precautions.

Ground the appliance according to safety pre-

cautions.

Make sure that the rated voltage and type of

power on the rating plate agree with the volt-

age and the power of the local power supply.

Always use a correctly installed shockproof

socket.

Do not use multi-way plugs, connectors and

extension cables. There is a risk of fire.

ENGLISH 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

Comments to this Manuals

No comments