IKEA FHGA5K 902-007-02 User Manual download pdf (Page 10)

provided with the product. Use only original

spare parts.

Manufacturer is not responsible for any in-

jury to persons and pets or damage to

property caused by failure to comply fol-

lowing requirements.

Caution! To proceed with the

installation refer to the assembly

instructions.

Warning! Installation process must

follow the laws, ordinances, directives

and standards (electrical safety rules and

regulations, proper recycling in accordance

with the regulations, etc.) in force in the

country of use!

Ensure that the local distribution condi-

tions (nature of the gas and gas pres-

sure) and the adjustment of the appliance

are compatible before proceeding with the

installation.

The parameters of adjustment setting

for this appliance are stated on the

rating plate (refer to the Technical data

chapter).

Warning! The appliance must be

earthed!

Warning! Risk of injury from electrical

current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of

voltage.

• Loose and inappropriate plug and socket

connections can make the terminal over-

heat.

• Have the clamping connections correctly

installed.

• Use strain relief clamp on cable.

Important! You must observe the minimum

distances to other appliances and furniture

cabinets or other units according to

Assembly Instruction.

If there is no oven beneath the hob insert a

dividing panel at a minimum distance of 20

mm from the bottom of the hob.

Protect the cut surfaces of the worktop

against moisture using a suitable sealant in-

cluded in the product in fitting bag. The

sealant seals the appliance to the work top

with no gap. Do not use silicon sealant be-

tween the appliance and the worktop.

Avoid installing the appliance next to doors

and under windows as hot cookware may

be knocked off the pan support when doors

and windows are opened.

Gas Connection

Warning! This appliance is not

connected to a combustion products

evacuation device.

Installation must comply with current local

regulation.

The connection of the cooktop to the gas

pipe network or gas cylinder must be made

by means of a rigid copper or steel pipe

with fittings complying with local regula-

tions, or by means of a continuous surface

stainless steel hose complying with local

regulations.

If you see any abnormalities do not re-

pair the pipe, contact local After Sales

Service (refer to the Service chapter).

The connection must be installed correctly,

fixed into hob connection pipe. Otherwise it

will cause leakage of gas

Warning! Once the installation is

complete, check the perfect seal of

every pipe fixing. Use soapy water, never

flame.

Electrical connection

Before connecting, check that the nominal

voltage of the appliance stated on the rat-

ing plate, corresponds to the available sup-

ply voltage. Also, check the power rating of

the appliance and ensure that the wire is

suitably sized to suit the appliance power

rating (refer to the Technical data chapter).

The rating plate is located on the lower cas-

ing of the hob.

ENGLISH 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 87 88

Comments to this Manuals

No comments