IKEA FROSTKALL 20312755 User Manual download pdf (Page 11)

After selection of the fridge or

freezer compartment the

animation starts

After selection of the

temperature the animation

flashes for a few minutes.

Bar indicators

The bars guide the user when interacting

with the unit and indicate at what level the

unit is performing. The bars indicate:

• which compartment is in focus (active),

when animation stops

• the desired temperature on the scale

• whether the set temperature is higher or

lower than the previous one (increasing

or decreasing animation).

Switching on

Connect the mains plug to the power socket

1. Press the ON/OFF if the display is off.

The temperature indicators show the set

default temperature.

2. The alarm buzzer may sound after a

few seconds.

To reset the alarm refer to "High

temperature alarm".

If "DEMO" appears on the display, the

appliance is in demonstration mode.

Refer to "Troubleshooting...".

To select a different set

temperature refer to

"Temperature regulation".

Switching off

Press ON/OFF for 3 seconds.

The display switches off.

To disconnect the appliance from the

power, disconnect the mains plug from the

power socket.

Switching on the fridge

To switch on the fridge press the fridge

compartment button.

The fridge OFF indicator goes off.

To select a different set

temperature refer to

"Temperature regulation".

Switching off the fridge

To switch off the fridge press the fridge

compartment button for few seconds.

The fridge OFF indicator is shown.

Temperature regulation

1. Select the fridge or freezer

compartment.

2. Press the temperature button to set the

temperature.

3. Set default temperature: +4°C for the

fridge and -18°C for the freezer.

The set temperature will be reached

within 24 hours.

The temperature indicators show the set

temperature.

After power failure the set

temperature remains stored.

High temperature alarm

An increase in the temperature in the

freezer compartment (for example due to

an earlier power failure or opening of the

door) is indicated by:

• flashing the alarm and freezer

temperature indicators;

• sounding of buzzer.

To reset the alarm press any button.

The buzzer switches off.

The freezer temperature indicator shows

the highest temperature reached for a few

seconds. Then show again the set

temperature.

The alarm indicator continues to flash until

the normal conditions are restored.

ENGLISH

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

Comments to this Manuals

No comments