IKEA OV33 User Manual download pdf (Page 14)

7

2

1

First lift carefully

and then remove

the glass panel.

Clean the glass panel with water and soap.

Dry the glass panel carefully.

When the cleaning is completed, install the

glass panel and the oven door. Do the

above steps in the opposite sequence.

The screen-printing zone must face the

inner side of the door. Make sure that after

the installation the surface of the glass

panel frame on the screen-printing zones is

not rough when you touch it.

Make sure that you install the internal glass

panel in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

Warning! Danger of

electrocution! Disconnect the fuse

before you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

3. Turn the lamp glass cover

counterclockwise to remove it.

4. Clean the glass cover.

5. Replace the oven light bulb with a 25

W, 230 V (50 Hz), 300 °C heat resistant

oven light bulb (connection type: E14).

6. Install the glass cover.

ENGLISH 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments