IKEA HÄFTIGT User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Problem Possible cause Solution
The compressor does not
start immediately after
pressing FastFreezing, or af-
ter the change of the tem-
perature.
This is normal, no error has
occurred.
The compressor starts after
some time.
The compressor does not
start immediately after
pressing Shopping, or after
the change of the tempera-
ture.
This is normal, no error has
occurred.
The compressor starts after
some time.
Water flows inside the re-
frigerator.
Food products prevent
water from flowing into the
water collector.
Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The Shopping is switched
on.
Switch off Shopping manually,
or wait until the function resets
automatically to set the tem-
perature. Refer to " Shop-
ping".
Temperature cannot be set. The FastFreezing function
is switched on.
Switch off FastFreezing func-
tion manually, or wait until the
function resets automatically
to set the temperature. Refer
to "FastFreezing function".
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The temperature in the ap-
pliance is too low/too high.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The temperature in the ap-
pliance is too low/too high.
The food products temper-
ature is too high.
Let the food products temper-
ature decrease to room tem-
perature before storage.
The temperature in the ap-
pliance is too low/too high.
Many food products were
inserted at the same time.
Insert less food products at the
same time.
ENGLISH 19
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Comments to this Manuals

No comments