IKEA RDWTI60 User Manual download pdf (Page 9)

Consumption values (for full washing cycle)

Programme

Programme duration

(minutes)

Energy consumption

(kWh)

Water consumption

(litres)

120-130 1,8-2,0 22-24

105-115 1,5-1,7 23-25

30 0,9 9

1)

130-140 1,0-1,2 14-16

12 0,1 5

1) The duration of this washing programme is prefixed (longer) than the others due to a prolonged drying

and washing phases.

The pressure and temperature of the wa-

ter, the variations of power supply and

the quantity of dishes can change these values.

Use of the appliance

Refer to the following instructions for each step

of procedure:

1. Make a check if the water softener level is

correct for the water hardness in your area.

If necessary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dishwash-

er.

5. Set the correct washing programme for the

type of load and soil.

6. Fill the detergent dispenser with the correct

quantity of detergent.

7. Start the washing programme.

If you use detergent tablets, refer to the

chapter 'Use of detergent'.

Setting the water softener

The water softener removes minerals and salts

from the water supply. Minerals and salts can

have bad effect on the operation of the appli-

ance.

Water hardness is measured in equivalent

scales:

• German degrees (dH°).

• French degrees (°TH).

• mmol/l (millimol per litre - international unit

for the hardness of water).

•Clarke.

Adjust the water softener to the water hard-

ness in your area. If necessary, contact your

local water authority.

Water hardness

Water hardness setting

°dH °TH mmol/l Clarke manually electronically

51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comments to this Manuals

No comments