IKEA RDW60 User Manual download pdf (Page 7)

Indicator lights

1)

The indicator light comes on when it is nec-

essary to fill the salt container. Refer to the

chapter 'Use of dishwasher salt'.

The salt indicator light can stay on for some

hours, but it does not have an unwanted ef-

fect on the operation of the appliance.

1) The indicator light is off while a washing programme operates.

Programme selection/cancel button

Use the programme selection/cancel button

for these operations:

• To set the washing programme. Refer to

the chapter 'Setting and starting a wash-

ing programme'.

• To set the water softener. Refer to the

chapter 'Setting the water softener'.

• To deactivate/activate the audible sig-

nals. Refer to the section 'Audible signals'.

• To cancel a washing programme in pro-

gress. Refer to the chapter 'Setting and

starting a washing programme'.

Half-load button

The half-load option is not available for all

washing programmes. Refer to the chapter

'Washing programmes'.

• Load dishes in the upper and lower bas-

ket.

• Decrease the detergent dosage when

you use the half-load option.

• Press the half-load button to set the op-

tion.

– The half-load indicator light comes on,

when the half-load option is selectable.

With the half-load button pressed the

time duration and the consumption of

water and energy are reduced.

Setting mode

The appliance is in setting mode when all

the programme indicator lights are off and

the end indicator light flashes.

The appliance must be in setting mode for

these operations:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the audible sig-

nals.

If a programme indicator light is on, cancel

the programme to go back to the setting

mode. Refer to the chapter "Setting and

starting a washing programme".

Programme indicator lights A and B

Apart the selection of the corresponding

washing programme, these lights have an

auxiliary functions:

• The adjustment of the water softener lev-

el.

• Deactivation/activation of the audible

signals.

Audible signals

You can hear an audible signal:

• At the end of the washing programme.

• When the appliance has a malfunction.

The activation of the audible signals is set

at the factory.

Do these steps to deactivate the audible

signals:

1. Switch on the appliance.

2. Make sure that the appliance is in set-

ting mode.

3. Press and hold the programme selec-

tion/cancel button until programme in-

dicator light A flashes and programme

indicator light B comes on.

4. Press the programme selection/cancel

button again.

– Programme indicator light A comes

on.

– Programme indicator light B starts to

flash.

5. Wait until programme indicator light A

goes off.

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 99 100

Comments to this Manuals

No comments