IKEA RDW60 User Manual download pdf (Page 20)

Caution! If you connect the appliance

to new pipes or pipes that are not used

for a long time, we recommend to run the

water for some minutes before you connect

the inlet hose.

Aqualock inlet hose

The inlet hose is a high pressure resistant. It

can hold pressure at maximum 6 MPa. From

external the inlet hose has a sheathing

against eventual damages. If the inner hose

breaks, the water that is in the hose will be-

came dark. You can see it across the special

transparent sheathing. Turn off the water

tap immediately and contact the After Sales

Service.

A

B

The aqualock inlet

hose is installed

with a safety device

to prevent acciden-

tal loosening. To

disconnect the hose:

•Press the lever

(B).

• Turn the retaining

ring (A) anticlock-

wise.

Turn the inlet hose

to the left or the

right to suit the in-

stallation. Tight the

locknut correctly to

prevent water

leaks.

If you use a in-

let hose exten-

sion the total

reached length

must be no longer

than 4 metres.

Drain hose

A

If you connect the

water drain hose to

a water trap under

the sink, remove the

plastic membrane

(A). If you do not re-

move the mem-

brane, remaining

food can cause a

blockage in the

drain hose spigot.

Caution! Make

sure that the

water couplings are

tight to prevent wa-

ter leakage.

Electrical connection

Warning! The manufacturer is not

responsible if you do not follow these

safety precautions.

This appliance needs to be earthed accord-

ing to safety precautions.

Make sure that the rated voltage and type

of power on the rating plate agree with the

voltage and the power of the local power

supply.

Always use a correctly installed shockproof

socket.

ENGLISH 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 99 100

Comments to this Manuals

No comments