IKEA MEDELSTOR 60385801 User Manual download pdf (Page 12)

When rinse aid chamber is empty, the rinse

aid indicator is turned on notifying to refill

rinse aid. If the drying results are

satisfactory while using multi-tablets only, it

is possible to deactivate the notification for

refilling rinse aid. However, for best drying

performance, always use rinse aid.

If standard detergent or multi-tablets

without rinse aid are used, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse aid empty

notification

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators , , and

start flashing and the display is blank.

2. Press .

• The indicators , and are

off.

• The indicator still flashes.

• The display shows the current setting.

– = rinse aid empty notification

activated.

– = rinse aid empty

notification deactivated.

3. Press to change the setting.

4. Press on/off to confirm the setting.

Acoustic signals

Acoustic signals sound when a malfunction

of the appliance occurs. It is not possible to

deactivate these acoustic signals.

There is also an acoustic signal that sounds

when the programme is completed. By

default, this acoustic signal is activated and

it is possible to deactivate it.

In addition, an acoustic signal will sound

before the AutoOpen will open the door.

This acoustic signal stops only if AutoOpen

is deactivated.

When pressing the main switch to turn on

the dishwasher, it makes a short beep

sound. The beep is activated by default, but

it is possible to deactivate it together with

the end of programme acoustic signal.

How to deactivate the acoustic signals

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators , , and

flash and the display is blank.

2. Press .

• The indicators , and are

off.

• The indicator still flashes.

• The display shows the current setting:

– = Acoustic signal off.

– = Acoustic signal on.

3. Press to change the setting.

4. Press on/off to confirm the setting.

AutoOpen

AutoOpen improves the drying results with

less energy consumption.

ENGLISH

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comments to this Manuals

No comments