IKEA MEDELSTOR 60385801 User Manual download pdf (Page 10)

The display shows the updated programme

duration.

The ExtraHygiene option is not applicable

to the following programmes:

• P5 (Glass)

• P6 (Rinse & Hold)

AutoOpen is deactivated when

the programme P3 (Quick) is

combined with ExtraHygiene

option due to the high

temperature.

DryPlus

Activate this option when you want to boost

the drying performance. With use of this

option, the duration of some programmes,

water consumption and the last rinse

temperature can be affected.

The combination of DryPlus and rinse aid

gives you even better drying result.

The DryPlus option is a permanent option

for all programmes other than P4 (ECO)

and need not to be selected at every cycle.

Every time P4 (ECO) is activated, DryPlus

option is off and needs to be chosen

manually. In other programmes, the setting

of DryPlus is permanent and is

automatically used in the next cycles. The

setting can be changed at any time before

programme starts.

How to activate DryPlus

Press . The related indicator comes on.

If the option is not applicable to the

programme, the related indicator does not

come on or it flashes quickly for a few

seconds and then goes out.

The display shows the updated programme

duration.

Settings

Programme selection mode and user

mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

Settings available in the user mode:

• The level of water softener according to

the water hardness.

• Activation or deactivation of the acoustic

signal for the end of a programme.

• Activation or deactivation of the rinse

aid empty notification.

• Activation or deactivation of AutoOpen.

As the appliance stores the saved

settings, there is no need to configure it

before every cycle.

How to set the programme selection mode

The appliance is in programme selection

mode when, after the activation, the display

shows the number of programme .

The display shows the programme duration

after a few seconds.

After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode the

following way:

1. Press and hold RESET until the

appliance is in programme selection

mode.

The water softener

The water softener removes minerals from

the water supply, which would have a

detrimental effect on the washing results

and on the appliance.

The higher the content of these minerals, the

harder your water is. Water hardness is

measured in equivalent scales.

ENGLISH 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments