IKEA MEDELSTOR 60385801 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
Problem and alarm code Possible cause and solution
The appliance does not
drain the water.
The display shows .
Make sure that the sink spigot is not clogged.
Make sure that the filter in the outlet hose is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows .
Close the water tap and contact an Authorised Service
Centre.
The appliance stops and
starts more times during op-
eration.
It is normal. It provides optimal cleaning results and en-
ergy savings.
The program lasts too long.
If the delayed start option is set, cancel the delay setting
or wait for the end of the countdown.
The remaining time in the
display increases and skips
nearly to the end of pro-
gram time.
This is not a defect. The appliance is working correctly.
Small leak from the appli-
ance door.
The appliance is not levelled. Loosen or tighten the ad-
justable feet (if applicable).
The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
The appliance door is diffi-
cult to close.
The appliance is not levelled. Loosen or tighten the ad-
justable feet (if applicable).
Parts of the tableware are protruding from the baskets.
Rattling/knocking sounds
from inside the appliance.
The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
The appliance trips the cir-
cuit-beaker.
The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.
Internal electrical fault of the appliance. Contact an Au-
thorised Service Centre.
The salt indicator continues
to stay on after the replen-
ishment of the salt container
If after 3 or 4 programmes, the salt indicator continues to
stay on, contact an Authorised Service Centre.
This can occur when you are using salt that needs more
time to dissolve.
There is no unwanted effect on the performance of the
appliance.
ENGLISH 21
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments