• The indicator and go off.
• The indicator continues to
flash.
• The display shows the current setting:
–
= Acoustic signal on.
– = Acoustic signal off.
3. Press to change the setting.
4. Press the on/off button to confirm the
setting.
Before first use
1. Fill the rinse aid dispenser.
2. Open the water tap.
3. Start a program to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
Filling the rinse aid dispenser
1 2
3
4
5
To adjust the
released quantity of
rinse aid, turn the
selector between
position 1 (lowest
quantity) and
position 4 (highest
quantity).
Daily use
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent. If you use multi-
tablets, activate the option Multitab.
5. Set and start the correct programme for
the type of load and the degree of soil.
ENGLISH 11
Comments to this Manuals