ENGLISH 8
WARNING:
- Never use steam cleaning equipment.
- Disconnect the appliance from the
power supply.
IMPORTANT: do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean immediately with a damp
cloth.
• Clean the surfaces with a damp cloth.
If it is very dirty, add a few drops of
washing up detergent to the water.
Finish off with a dry cloth.
IMPORTANT: do not use abrasive sponges
or metallic scrapers or scourers. Over time,
these can ruin the surface.
• Use detergents specifi cally designed for
cleaning the appliance and follow the
manufacturer instructions.
IMPORTANT: clean the fi lters at least
monthly to remove any oil or grease
residuals.
To clean the grease fi lter
The metal grease fi lter has an unlimited life
and must be washed once a month by hand
or dishwasher at low temperature and with
a short cycle.
With cleaning in a dishwasher the grease
fi lter may become dull; this does not effect
its fi ltering capacity.
Grease fi lter maintenance:
1. Disconnect the hood from the power
supply.
2. Open the extraction grille or remove the
self-supporting grease fi lter (in the latter
case, wash the fi lter immediately).
3. Remove the device securing the grease
fi lter.
4. Remove the dirty grease fi lter.
5. After changing or washing the grease
fi lter (depending on the model), refi t
by proceeding in reverse order, making
sure it covers the entire extraction
surface.
Charcoal fi lter maintenance
(Recirculation hoods only).
Charcoal fi lter is neither lavable nor
regenerable.
Replace it every 4 months.
1. Disconnect the hood from the power
supply.
2. Open the extractor grille or remove the
self-supporting grease fi lter.
3. Fit the fi lter over the extraction motor
protection grille so that the slots on the
fi lter match the hooking pins located at
the sides of the motor protection grille.
4. Turn the charcoal fi lter clockwise to lock
it (bayonet fi xing).
Cleaning and maintenance
Comments to this Manuals