IKEA GRÄNSLÖS User Manual download pdf (Page 18)

7

2

1

First lift carefully

and then remove

the glass panels one

by one. Start from

the top panel.

Clean the glass panels with water and

soap. Dry the glass panels carefully.

When the cleaning is completed, install the

glass panels and the oven door. Do the

above steps in the opposite sequence.

Make sure that you put the glass panels (A

and B) back in the correct sequence. The

first panel (A) has a decorative frame. The

screen-printing zone must face the inner

side of the door. Make sure that after the

installation the surface of the glass panel

frame (A) on the screen-printing zones is

not rough when you touch it.

A B

Make sure that you install the middle panel

of glass in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of

the appliance. It prevents damage to the

lamp glass cover and the cavity.

Warning! Danger of

electrocution! Disconnect the fuse

before you replace the lamp.

The lamp and the lamp glass

cover can be hot.

Caution! Always hold the

halogen lamp with a cloth to

prevent grease residue from

burning on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

3. Turn the lamp glass cover

counterclockwise to remove it.

4. Clean the glass cover.

5. Replace the oven light bulb with a 40

W, 230 V (50 Hz), 300 °C heat resistant

oven light bulb (connection type: G9).

6. Install the glass cover.

ENGLISH

18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments