IKEA OV23 User Manual download pdf (Page 14)

Cancelling the clock functions

1. Press the again and again until the

necessary function indicator flashes.

2. Press and hold .

The clock function goes out after some

seconds.

Using the accessories

Warning! Refer to Safety

chapters.

Using the panel shield while grilling with

open oven door

When you use the grilling function with

open oven door it is necessary to attach the

panel shield below the control panel. It

prevents control panel damage because of

heat.

Warning! The shield will be very

hot when you use it while grilling.

Before you remove the shield

wait until it is cold. There is a risk

of burns.

1. Open top oven door.

2. Position the shield horizontally.

3. Make sure the text "For grilling use

only" is on top and you can read it.

The shield has magnets which let you

attach it below the control panel.

Using the core temperature sensor

The core temperature sensor measures the

core temperature of the meat.

There are two temperatures to be set:

• The oven temperature.

• The core temperature.

Caution! Only use the core

temperature sensor supplied with

the appliance, or genuine

replacement parts.

1. Put the plug of the core temperature

sensor into the socket on the side of the

main oven.

2. Put the point of the core temperature

sensor into the centre of the meat.

3. Press again and again until the

indicator for the core temperature

sensor flashes.

4. Press the button or to set the core

temperature.

You can set the temperature from 30 °C

to 99 °C. Refer to values in the table.

Recommended core temperatures

50 °C Rare

60 °C Medium

70 °C Well done

5. Set the oven function and the oven

temperature.

When the meat is at the set core

temperature, an acoustic signal sounds for

two minutes. Press a button to stop the

signal.

6. Deactivate the appliance.

7. Remove the plug of the core

temperature sensor from the socket.

Remove the meat from the appliance.

ENGLISH

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments