IKEA RENLIGFWM8 50309643 User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Problem Possible solution
The spin phase does not
operate or the washing
cycle lasts longer than
usually.
Set the spin programme.
Adjust manually the items in the tub and start the spin
phase again. This problem may be caused by balance
problems.
If above mentioned solutions do not help, contact the Au-
thorised Service Centre (as the filter of the drain pump may
be clogged).
There is water on the
floor.
Make sure that the couplings of the water hoses are tight
and there is not water leakages.
Make sure that the inlet hose and/or the drain hose have
no damages.
Make sure you use the correct detergent and the correct
quantity of it.
You cannot open the ap-
pliance door.
Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water in the
drum.
The appliance makes an
unusual noise.
Make sure the levelling of the appliance is correct. Refer to
'Installation Instruction'.
Make sure that the packaging and/or the transit bolts are
removed. Refer to 'Installation Instruction'.
Add more laundry in the drum. The load may be too small.
The cycle is shorter than
the time displayed.
The appliance calculates a new time according to the laundry
load. See the ‘Consumption Values’ chapter.
The cycle is longer than
the time displayed.
An unbalanced laundry load increases the duration time. This
is a normal behaviour of the appliance.
The washing results are
not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
You cannot set an option.
Make sure that you press only the wanted button(s).
After the check, activate the appliance. The
programme continues from the point of
interruption.
If the problem occurs again, contact the
Authorised Service Centre.
If the display shows other alarm codes.
Deactivate and activate the appliance. If
the problem continues, contact the Service.
Service
We recommend the use of original spare
parts. After the check, switch on the
ENGLISH 23
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Comments to this Manuals

No comments