IKEA ENASTÅENDE User Manual download pdf (Page 20)

Problem and alarm code Possible solution

The salt indicator continues

to stay on after replenish-

ment of the salt container.

• If after 3 or 4 programmes, the salt indicator continues to

stay on, contact the service.

This can occur when you are using salt that needs more

time to dissolve.

There in no unwanted effect on the performance of the

appliance.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the table,

contact an Authorised Service Centre.

The washing and drying results are not satisfactory

Problem Possible solution

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Adjust

the rinse aid selector to a lower position.

• The quantity of detergent is too much.

There are stains and dry wa-

ter drops on glasses and

dishes.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid selector to a higher position.

• The quality of the rinse aid can be the cause.

The dishes are wet.

• The programme does not have a drying phase or has

a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser and

use rinse aid and multi-tablets together.

Refer to "Hints and tips" for

other possible causes.

Technical information

Dimensions Width / height / depth

(mm)

596 / 818-898 / 550

Electrical connection

Voltage (V) 220 - 240

Frequency (Hz) 50

ENGLISH 20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 95 96

Comments to this Manuals

No comments

IKEA ENASTÅENDE User Manual Page 20

Comments to this Manuals

Related products and manuals for Dishwashers IKEA ENASTÅENDE