IKEA ENASTÅENDE User Manual download pdf (Page 12)

The rinse aid dispenser will remain

activated until you modify the setting again

How to activate the rinse aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators , and start

to flash and the display is blank.

2. Press .

• The indicators

and go off.

• The indicator continues to

flash.

• The display shows the current setting:

= rinse aid dispenser

deactivated.

3. Press to change the setting.

= rinse aid dispenser activated.

4. Press the on/off button to confirm the

setting.

5. Adjust the dosage of rinse aid.

6. Fill the rinse aid dispenser.

Acoustic signals

The acoustic signals operate when the

appliance has a malfunction and it is not

possible to deactivate them.

There are also the acoustic signals that

operates when you set the level of the

water softener and when the programme is

completed. By default, this acoustic signal is

on, but it is possible to deactivate it.

How to deactivate the acoustic signals

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators , and start

to flash and the display is blank.

2. Press

.

• The indicators and go off.

• The indicator continues to

flash.

• The display shows the current setting:

– = Acoustic signal on.

–

= Acoustic signal off.

3. Press to change the setting.

4. Press the on/off button to confirm the

setting.

Before first use

1. Make sure that the current level of the

water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the baskets.

When you start a programme,

the appliance can take up to 5

minutes to recharge the resin in

the water softener. It seems that

the appliance is not working. The

washing phase starts only after

this procedure is completed. The

procedure will be repeated

periodically.

ENGLISH 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 95 96

Comments to this Manuals

No comments