IKEA RIWM60 User Manual download pdf (Page 6)

• The water pressure must be in the limits (re-

fer to the chapter «Technical data» table).

Make sure that the local water authority

gives you the average mains pressure in

your area.

• Make sure that there are no kinks in the wa-

ter inlet hose and that the water inlet hose

is not squashed or entangled.

• Before connecting up the appliance to new

pipework or to pipework that has not been

used for some time, run off a reasonable

amount of water to flush out any debris that

may have collected in the pipes.

• Turn the inlet hose on the back of the appli-

ance to the left or the right to suit the instal-

lation.

• The inlet hose must not be lengthened. If it is

too short and you do not wish to move the

tap, you will have to purchase a new, longer

hose specially designed for this type of use.

• Before opening the water tap, be sure to

tighten the ring nut well to prevent any leaks.

Water drainage

• Make sure the end of the drain hose cannot

come unhooked when the appliance is emp-

tying. This could be done by tying it to the

tap with a piece of string or attaching it to

the wall.

• The drain hose must be placed at a height

of not less than 44 cm and not more than 90

cm. Please refer to the Assembly Instruction

booklet.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from the

mains socket.

• Clean the exterior cabinet of the appliance

with soap and water only, and then dry

thoroughly.

• The washing powder and additive dispens-

er drawer should be cleaned regularly.

• Inspected the pump regularly and particu-

larly if:

– the appliance does not empty and/or

spin

– the appliance makes an unusual noise

during draining due to objects such as

safety pins, coins etc. blocking the pump.

• Never remove the pump cover during a

wash cycle. Always wait until the appliance

has drained out the water. If you have se-

lected an high temperature washing pro-

gramme please wait until the water has

cooled down.

• Ensure that the pump cover is securely re-

tightened to prevent any leaks.

Product description

1

2

3

4

5

6

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating Plate

5 Drain pump

6 Adjustable feet

ENGLISH 6

1 2 3 4 5 6 7 8 9 10 11 ... 103 104

Comments to this Manuals

No comments