IKEA RENLIGFWM User Manual download pdf (Page 13)

• the programme will start after the

selected delay has expired.

Cancelling the delayed start after having

started the programme:

1. Set the washing appliance to PAUSE by

pressing button

.

2. Press button once, the indicator

relevant to the selected delay goes off.

3. Press button again to start the

programme.

The Delay Start cannot be

selected with DRAIN programme.

The selected delay can be

changed only after selecting the

washing programme again. The

door will be locked throughout

the delay time. If you need to

open the door, you must set the

appliance to PAUSE (by pressing

the button ) and then wait a

few minutes. After you have

closed the door, press the button

again.

Start the programme by pressing button

To start the selected programme, press

button , the corresponding green

indicator stops flashing. The indicators

corresponding to the running phase

illuminates. The appliance starts operating

and the door is locked.

To interrupt a programme which is running,

press button : the corresponding green

indicator starts to flash.

To restart the programme from the point at

which it was interrupted, press button

again.

If you have chosen a delayed start, the

appliance will begin the countdown.

If an incorrect option is selected, the red

indicator of button flashes 3 times.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out. Before

you make any change, you must PAUSE the

appliance by pressing button

.

Changing a running programme is possible

only by resetting it. Turn the programme

selector dial to

and then to the new

programme position. Start the new

programme by pressing button

again.

The washing water in the tub will be not

emptied out.

Interrupting a programme

Press button to interrupt a programme

which is running, the corresponding green

indicator starts to flash.

Press button again to restart the

programme.

Cancelling a programme

Turn the selector dial to to cancel a

programme which is running.

You can select now a new programme.

Opening the door

After the programme has started the door is

locked. If, for any reason, you need to open

it, set firstly the appliance to PAUSE by

pressing button . After a few minutes it

will be possible to open the door.

If the door remains locked, this means that

the appliance is already heating or that the

water level is too high. In any case, do not

try to force the door!

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Comments to this Manuals

No comments