IKEA SMAKSAOVPX User Manual download pdf (Page 17)

The display shows the symbol of the core

temperature sensor and the default

core temperature.

4. Press to save the new core

temperature, or wait 10 seconds for the

setting to be saved automatically.

The new default core temperature is

displayed during the next use of the core

temperature sensor.

When the meat is at the set core

temperature, the symbol for the core

temperature sensor

and the default

core temperature flash. A signal sounds for

two minutes. The oven turns off

automatically.

5. Press any button or open the oven door

to stop the signal.

6. Remove the plug of the core

temperature sensor from the socket.

Remove the meat from the oven.

Warning! Be careful when you

remove the tip and plug of the

core temperature sensor. The

core temperature sensor is hot.

There is a risk of burns.

The Duration and End do

not operate with the core

temperature sensor.

You can change the core temperature at

any time during the cooking:

1. Press :

• one time - the display shows the set

core temperature which changes

every 5 seconds to the current core

temperature.

• two times - the display shows the

current oven temperature which

changes every 5 seconds to the set

oven temperature.

• three times - the display shows the

set oven temperature.

2. Use the control knob to change the

temperature.

Using the telescopic runners

Keep the installation instructions

for the telescopic runners for

future use.

With telescopic runners you can put in and

remove wire shelves and trays easily.

Caution! Do not clean the

telescopic runners in the

dishwasher. Do not lubricate the

telescopic runners.

1

°C

Pull out the right

and left hand

telescopic runners.

2

°C

Put the wire shelf on

the telescopic

runners and

carefully push them

into the oven.

Make sure you push back the telescopic

runners fully in the oven before you close

the oven door.

Warning! Refer to "Product

description" chapter.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Comments to this Manuals

No comments