IKEA MATMÄSSIGR User Manual download pdf (Page 15)

Important!

• For the minimum distances from the other

appliances or cabinets and further

information on the installation refer to

the Assembly Instruction.

• If there is no oven beneath the hob insert

a dividing panel at a minimum distance

of 20 mm from the bottom of the hob.

• Do not use silicon sealant between the

appliance and the worktop.

Electrical connection

Warning! Refer to Safety

chapters.

Warning! All electrical

connections must be made by an

authorised installer.

Electrical connection

• Before connecting, check if the nominal

voltage of the appliance, provided on

the rating plate, corresponds to the

available supply voltage. The rating

plate is located on the lower casing of

the hob.

• Follow the connection diagram (it is

located on the underneath surface of the

casing of the hob).

• Use only original spare parts provided

by spare parts service.

• The appliance is not provided with a

mains cable. Buy the right one from

specialized dealer. Single phase or two-

phase connection requires a mains cable

of minimum 70°C temperature stability.

Cable has been provided with end

sleeves. According to IEC regulations use

for one-phase connection: mains cable 3

x 4mm² and for two-phase connection:

mains cable 4 x 2.5mm². Please respect

specific national regulations in the first

priority.

• You must have the means for

disconnection incorporated in the fixed

wiring.

• You must have the connection and the

connecting links carried out as shown in

the connection diagram.

• The earth lead is connected to terminal

and must be longer than leads carrying

electric current.

• Secure the connecting cable with cable

clips or clamps.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments