IKEA SKINANDE User Manual download pdf (Page 9)

Adjusting the water softener

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Manual Elec-

tronic

51 - 70 91 - 125 9.1 - 12.5 64 - 88

2

1)

10

43 - 50 76 - 90 7.6 - 9.0 53 - 63

2

1)

9

37 - 42 65 - 75 6.5 - 7.5 46 - 52

2

1)

8

29 - 36 51 - 64 5.1 - 6.4 36 - 45

2

1)

7

23 - 28 40 - 50 4.0 - 5.0 28 - 35

2

1)

6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

2

1)

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2

< 4 < 7 < 0.7 < 5

1

2)

1

2)

1) Factory position.

2) Do not use salt at this level.

You must adjust the water softener

manually and electronically.

Manual adjustment

1

2

Turn the water

hardness dial to the

position 1 or 2.

Electronic adjustment

1. Press the on/off button to activate the

appliance.

2. Make sure that the appliance is in set-

ting mode. Refer to ‘SETTING AND

STARTING A PROGRAMME’.

3. Press and hold function buttons (B) and

(C) at the same time until the indicators

of function buttons (A), (B) and (C) flash.

4. Press function button (A).

• The indicators of function buttons (B)

and (C) go off.

• The indicator of function button (A)

continues to flash.

• The acoustic signals operate. Exam-

ple: five intermittent acoustic signals =

level 5.

• The display shows the setting of the

water softener. Example:

= level

5.

5. Press function button (A) again and

again to change the setting.

6. Deactivate the appliance to confirm.

Filling the salt container

Caution! Water and salt can come out

from the salt container when you fill it.

Risk of corrosion. To prevent this, after the

replenishment, start a programme.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments