IKEA SKINANDE User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
Problem Possible cause Possible solution
The programme does
not start.
The mains plug is not connec-
ted in the mains socket.
Connect the mains plug.
The appliance door is open. Close the appliance door.
The fuse in the fuse box is
damaged.
Replace the fuse.
The delay start is set. Cancel the delay start or wait
for the end of the countdown.
The appliance does
not fill with water.
The water tap is closed. Open the water tap.
The water pressure is too low. Contact your local water au-
thority.
The water tap is clogged or
there is limescale on it.
Clean the water tap.
The filter in the water inlet hose
is clogged.
Clean the filter.
The water inlet hose has a kink
or a bend.
Make sure that the position of
the hose is correct.
The anti-flood device is on.
There are water leakages in
the appliance.
Close the water tap and con-
tact the service.
The appliance does
not drain the water.
The sink spigot is clogged. Clean the sink spigot.
The water drain hose has a
kink or a bend.
Make sure that the position of
the hose is correct.
The salt indicator con-
tinues to stay on after
the replenishment of
the salt container.
This can occur when you are
using salt that needs more time
to dissolve.
There is no unwanted effect on
the performance of the appli-
ance.
If after 3 or 4 programmes, the
salt indicator continues to stay
on, contact the service.
After the checks are completed, activate the
appliance. The programme continues from
the point of interruption.
If the problem occurs again, contact the
service.
If the display shows other alarm codes, con-
tact the service.
If the washing and drying results are not
satisfactory
Whitish streaks or bluish layers on glasses
and dishes
The released quantity of rinse aid is too
much. Adjust the rinse aid selector to a
lower position.
The quantity of detergent is too much.
ENGLISH 15
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments