IKEA MEDELSTOR 80299360 User Manual download pdf (Page 12)

rinse aid dispenser. In this case the drying

results may not be satisfactory.

With the rinse aid dispenser deactivated,

the rinse aid indicator is always off.

How to deactivate the rinse aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators

, and start

to flash and the display is blank.

2. Press .

• The indicators

and go off.

• The indicator continues to

flash.

• The display shows the current setting.

–

= rinse aid dispenser

activated.

–

= rinse aid dispenser

deactivated.

3. Press to change the setting.

4. Press the on/off button to confirm the

setting.

Acoustic signals

The acoustic signals operate when the

appliance has a malfunction and it is not

possible to deactivate them.

There is also an acoustic signal that

operates when the programme is

completed. By default, this acoustic signal is

on, but it is possible to deactivate it.

How to deactivate the acoustic signal for

the end of programme

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators

, , start to

flash and the display is blank.

2. Press

• The indicators and go off.

• The indicator

continues to

flash.

• The display shows the current setting:

– = Acoustic signal on.

– = Acoustic signal off.

3. Press to change the setting.

4. Press the on/off button to confirm the

setting.

Before first use

1. Make sure that the current level of the

water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the baskets.

ENGLISH 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments