1 2
Set switch to posi-
tion 1 or 2.
Electronic adjustment
The water softener is set at the factory at
level 5.
1. Press and hold the start/cancel button.
Turn the programme knob clockwise
until the programme marker agrees
with the first washing programme on
the control panel.
2. Release the start/cancel button when
the on/off indicator light and the start/
cancel indicator light start to flash.
– At the same time, the end indicator
light flashes to show the level of the
water softener.
Example:
5 flashes, pause, 5 flashes, pause,
etc... = level 5
3. Press the start/cancel button one time
to increase the water softener level by
one step.
The end indicator light shows the new
level.
4. Turn the programme knob to the off po-
sition to save the operation.
Use of dishwasher salt
Caution! Only use dishwashers salt.
Types of salt that are not applicable
for dishwashers cause damage to the water
softener.
1
2
3
Fill the salt contain-
er with 1 litre of wa-
ter (only the first
operation).
4
Fill the salt contain-
er with 1,5-2,0 kg of
salt. Use the salt
funnel supplied.
ENGLISH 9
Comments to this Manuals