IKEA UDDEN CG3 User Manual download pdf (Page 14)

Hob

Daily use

Using the hob

You operate the appliance with the combina-

tion appliance’s ring switches. To switch on the

cooking zone and set the power turn the con-

trol knob between 1 and 9.

To switch off the cooking zone turn the control

knob to position 0.

When a cooking zone is switched on, it

may hum briefly. This is a characteristic of

all ceramic glass cooking zones and does not

impair either the function or the life of the ap-

pliance.

Helpful hints and tips

Information on acrylamides

Important! According to the latest scientific

knowledge, intensive browning of food,

especially in products containing starch, can

constitute a health risk due to acrylamides.

Therefore, we recommend cooking at the

lowest possible temperatures and not

browning foods too much.

Energy saving

If possible, always place lids on the pans.

Place cookware on the cooking zone before

you switch it on.

The bottom of the cookware should be as thick

and flat as possible.

• Switch cooking zones off before the end of

the cooking time, to take advantage of re-

sidual heat

• Bottom of pans and cooking zones should

be the same size.

Care and cleaning

Warning! Sharp objects and abrasive

cleaning agents will damage the

appliance. Clean the appliance and remove

the residues with water and washing up liquid

after each use. Remove also the remnants of

the cleaning agents!

Cleaning the ceramic hob

Scratches or dark stains on the glass ce-

ramic that cannot be removed do not af-

fect the functioning of the appliance.

Removing the residues and stubborn

residues:

1. Food containing sugar, plastics, tin foil res-

idues should be removed at once using a

scraper. Place a scraper on the glass ce-

ramic surface at an angle and remove res-

idues by sliding the blade over the surface.

Wipe the appliance with a damp cloth and

a little washing up liquid. Finally, rub the

appliance dry using a clean cloth.

The scraper is available in the Service

Centre or in the authorized spare parts

shops.

2. Limescale rings, water rings, fat splashes,

shiny metallic discolorations should be re-

moved after the appliance has cooled

down using cleaner for glass ceramic or

stainless steel.

ENGLISH 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments