IKEA ISANDE 20282372 User Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
Problem Possible cause Solution
The compressor does not
start immediately after
pressing Fast Freezing, or
after the change of the tem-
perature.
This is normal, no error has
occurred.
The compressor starts after
some time.
The compressor does not
start immediately after
pressing Shopping, or after
the change of the tempera-
ture.
This is normal, no error has
occurred.
The compressor starts after
some time.
Water flows inside the re-
frigerator.
Food products prevent
water from flowing into the
water collector.
Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The Shopping is switched
on.
Switch off Shopping manually,
or wait until the function resets
automatically to set the tem-
perature. Refer to " Shop-
ping".
Temperature cannot be set. The Fast Freezing function
is switched on.
Switch off Fast Freezing func-
tion manually, or wait until the
function resets automatically
to set the temperature. Refer
to "Fast Freezing function".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the OK pressed for ap-
proximately 10 seconds until a
long sound is heard and dis-
play shuts off for a short time.
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The temperature in the ap-
pliance is too low/too high.
The door is not closed cor-
rectly.
Refer to "Closing the door".
ENGLISH 20
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Comments to this Manuals

No comments