IKEA RENGÖRA 70385834 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
German degrees
(°dH)
French degrees
(°fH)
mmol/l Clarke de-
grees
Water softener level
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1)
Factory setting.
2)
Do not use salt at this level.
Whether you use a standard detergent or
multi-tabs (with or without salt), set the
proper water hardness level to keep the
salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to set the water softener level
Make sure the appliance is in the
programme selection mode.
1. Press and hold simultaneously and
to enter the user mode.
The indicators:
, , and start
flashing.
2. Press .
The indicators , and are off.
The indicator
still flashes.
The indicator starts flashing. The
number of flashes indicates the current
water softener setting (e.g. 5 flashes +
pause + 5 flashes... = level 5).
3. Press to change the setting. Each
pressing of the button increases the
level number by one. After reaching
level 10, the count starts from level 1.
4. Press on/off to confirm and save the
setting.
The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If the drying results are
satisfactory while using multi-tablets only, it
is possible to deactivate the notification for
refilling rinse aid. However, for best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
Make sure the appliance is in the
programme selection mode.
1. Press and hold simultaneously
and
to enter the user mode.
The indicators: , , and start
flashing.
2. Press .
The indicators:
, and are off.
The indicator still flashes.
ENGLISH
10
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Comments to this Manuals

No comments