IKEA RENGÖRA 00299383 User Manual download pdf (Page 13)

5

When you use multi-tablets, that contain

salt and rinse aid, is not necessary to fill the

salt container and the rinse aid dispenser.

• Adjust the water softener to the lowest

level.

• Set the rinse aid dispenser to the lowest

position.

What to do if you want to stop using multi-

tablets

Before you start to use detergent, salt and

rinse aid separately do the following

procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according to

the water hardness in your area.

5. Adjust the released quantity of rinse aid.

Setting and starting a programme

The Auto Off function

This function decreases energy consumption

by automatically deactivating the

appliance when it is not operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has not

started.

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press the button related to the

programme you want to start.

The related programme indicator comes on.

4. Close the appliance door to start the

programme.

Starting a programme with delay start

1. Set a programme.

2. Press

repeatedly until the indicator

related to the number of hours want to

set comes on (3, 6 or 9).

The delay indicator comes on.

3. Close the appliance door to start the

countdown.

While a countdown is running it is

possible to increase the delay time but

not to change the selection of the

programme.

When the countdown is completed, the

programme starts.

Opening the door while the appliance

operates

If you open the door while a programme is

running, the appliance stops. When you

close the door, the appliance continues from

the point of interruption.

Cancelling the delay start while the

countdown operates

When you cancel the delay start you have

to set the programme and options again.

Press and hold simultaneously and

until the appliance is in programme

selection mode.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Comments to this Manuals

No comments