IKEA RDW60 User Manual download pdf (Page 7)

Programme selection/cancel button

Use the programme selection/cancel button

for these operations:

• To set the washing programme. Refer to the

chapter 'Setting and starting a washing pro-

gramme'.

• To set the water softener. Refer to the chap-

ter 'Setting the water softener'.

• To deactivate/activate the audible signals.

Refer to the section 'Audible signals'.

• To cancel a washing programme in pro-

gress. Refer to the chapter 'Setting and start-

ing a washing programme'.

Half-load button

The half-load option is not available for all

washing programmes. Refer to the chapter

'Washing programmes'.

• Load dishes in the upper and lower basket.

• Decrease the detergent dosage when you

use the half-load option.

• Press the half-load button to set the option.

– The half-load indicator light comes on,

when the half-load option is selectable.

With the half-load button pressed the

time duration and the consumption of wa-

ter and energy are reduced.

Setting mode

The appliance is in setting mode when all the

programme indicator lights are off and the end

indicator light flashes.

The appliance must be in setting mode for

these operations:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the audible signals.

If a programme indicator light is on, cancel the

programme to go back to the setting mode.

Refer to the chapter "Setting and starting a

washing programme".

Programme indicator lights A and B

Apart the selection of the corresponding wash-

ing programme, these lights have an auxiliary

functions:

• The adjustment of the water softener level.

• Deactivation/activation of the audible sig-

nals.

Audible signals

You can hear an audible signal:

• At the end of the washing programme.

• When the appliance has a malfunction.

The activation of the audible signals is set at

the factory.

Do these steps to deactivate the audible sig-

nals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting

mode.

3. Press and hold the programme selection/

cancel button until programme indicator

light A flashes and programme indicator

light B comes on.

4. Press the programme selection/cancel

button again.

– Programme indicator light A comes on.

– Programme indicator light B starts to

flash.

5. Wait until programme indicator light A

goes off.

– Programme indicator light B continues to

flash.

– The end indicator light comes on.

The audible signals are activated.

6. Press the programme selection/cancel

button again.

– The end indicator light goes off.

The audible signals are deactivated.

7. Switch off the appliance to save the oper-

ation.

Do these steps to activate the audible signals:

1. Do the above procedure until the end in-

dicator light comes on.

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 91 92

Comments to this Manuals

No comments