2. Make sure that the appliance is in setting
mode.
3. Press and hold the programme selection/
cancel button.
4. Release the programme selection/cancel
button when programme indicator light A
starts to flash and programme indicator
light B comes on.
5. Wait until programme indicator light B
goes off.
– Programme indicator light A starts to
flash.
– The end indicator light starts to flash.
6. Press the programme selection/cancel
button one time.
– Programme indicator light A starts to
flash.
– The setting function of the water soften-
er is activated.
– The end indicator light flashes to show
the level of the water softener.
Example: 5 flashes, pause, 5 flashes,
pause, etc... = level 5.
7. Press the programme selection/cancel
button one time to increase the water
softener level by one step.
8. Press the on/off button to save the oper-
ation.
Use of dishwasher salt
Caution! Only use dishwashers salt.
Types of salt that are not applicable for
dishwashers cause damage to the water
softener.
1
2
3
Fill the salt container
with 1 litre of water
(only the first opera-
tion).
4
Fill the salt container
with 1,5-1,7 kg of
salt. Use the salt fun-
nel supplied.
5
Make sure that there
is no grain of salt
outer of the salt
compartment.
6
It is normal that water overflows from
the salt container when you fill it with
salt.
ENGLISH 10
Comments to this Manuals