
1. Switch off the appliance.
2. Set a new washing programme.
Fill the detergent dispenser with deter-
gent before you set a new washing pro-
gramme.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point
of interruption.
End of the washing programme
When the programme is completed, the
end indicator comes on. If you do not deac-
tivate the appliance within 3 minutes, only
the on/off indicator stays on. This helps to
decrease energy consumption.
1. Deactivate the appliance. Turn the pro-
gramme knob until the programme
marker is aligned with the on/off indi-
cator.
2. Close the water tap.
For better drying results, keep the door ajar
for some minutes before you remove the
dishes.
Let the dishes cool down before you re-
move them from the appliance. Hot dishes
are easily damaged.
Removing the load
• First remove items from the lower basket,
then from the upper basket.
• There can be water on the sides and
door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
Care and cleaning
Warning! Switch the appliance off
before you clean the filters.
Cleaning the filters
Important! Do not use the appliance
without the filters. Make sure that the
installation of the filters is correct. Incorrect
installation will cause unsatisfactory
washing results and damage to the
appliance.
1
2
A
C
B
Fully clean the filters
A, B and C below
running water.
3
1
2
To remove filters B
and C, turn the
handle approxi-
mately 1/4 anti-
clockwise.
4
A
Remove the flat fil-
ter A from the bot-
tom of the appli-
ance.
ENGLISH 14
Comments to this Manuals