IKEA SKINANDE User Manual download pdf (Page 10)

Settings

Programme selection mode and user

mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings can

be changed:

• The activation or the deactivation of the

acoustic signal for end of programme.

• The deactivation of the rinse aid

dispenser when you want to use the

Multitab option without rinse aid.

These settings will be saved until you

change them again.

How to set the programme selection mode

The appliance is in programme selection

mode when the programme indicator

is on and the display shows the

programme duration.

When you activate the appliance, usually it

is in programme selection mode. However,

if this does not happen, you can set the

programme selection mode in the following

way:

Press and hold simultaneously

and until the appliance is in programme

selection mode.

Use of rinse aid and multi-tablets

When you activate the option Multitab, the

rinse aid dispenser continues to release

rinse aid. However you can deactivate the

rinse aid dispenser. In this case the drying

results may not be satisfactory.

With the rinse aid dispenser deactivated,

the rinse aid indicator is always off.

How to deactivate the rinse aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously and until

the indicators

, and

start to flash and the display is blank.

2. Press .

• The indicators and go

off.

• The indicator continues to flash.

• The display shows the current setting.

–

= rinse aid dispenser

activated.

–

= rinse aid dispenser

deactivated.

3. Press

to change the setting.

4. Press the on/off button to confirm the

setting.

Acoustic signals

The acoustic signals operate when the

appliance has a malfunction and it is not

possible to deactivate them.

There is also an acoustic signal that

operates when the programme is

completed. By default, this acoustic signal is

on, but it is possible to deactivate it.

How to deactivate the acoustic signal for

the end of programme

The appliance must be in programme

selection mode.

1. To enter the user mode press and hold

simultaneously

and until

the indicators , and

start to flash and the display is blank.

2. Press .

ENGLISH

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments