IKEA SKINANDE User Manual download pdf (Page 11)

2. Press the on/off button to activate the

appliance. Make sure that the appli-

ance is in setting mode. Refer to ’SET-

TING AND STARTING A PROGRAMME’.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill the

rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for

the type of load and soil.

Using the detergent

1

2

3

A A

Put the detergent or the tablet in the com-

partment (A).

4

B

If the programme

has a prewash

phase, put a small

quantity of deter-

gent in compart-

ment (B).

5

Setting and starting a programme

Setting mode

The appliance must be in setting mode to

accept some operations.

The appliance is in setting mode when, af-

ter the activation:

• All the programme indicators come on.

If the control panel shows other conditions,

press and hold function buttons (B) and (C)

at the same time until the appliance is in

setting mode.

Starting a programme without delay start

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

3. Make sure that the appliance is in set-

ting mode.

4. Press the button of the programme you

want to set. The programme duration

flashes in the display.

5. Close the appliance door. The pro-

gramme starts.

• If you open the door, the display

shows the programme duration that

decreases with steps of 1 minute.

Starting a programme with delay start

1. Set the programme.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 79 80

Comments to this Manuals

No comments