IKEA SKINANDE User Manual download pdf (Page 11)

Using the detergent

1

2

3

A A

Put the detergent or the tablet in the com-

partment (A).

4

B

If the programme

has a prewash

phase, put a small

quantity of deter-

gent in compart-

ment (B).

5

Setting and starting a programme

The Auto Off function

To decrease the energy consumption, this

function automatically deactivates the ap-

pliance a few minutes after:

• You have not closed the door to start the

programme.

• The programme is completed.

Setting mode

For some settings it is necessary that the

appliance is in setting mode.

The appliance is in setting mode when, af-

ter the activation, the indicator of

is

on and the display shows the duration of

the programme.

If the control panel does not show this con-

dition, press and hold, at the same time

and until the indicator of

comes on.

Starting a programme without delay start

1. Open the water tap.

2. Press the on/off button to activate the

appliance. The indicator of the

programme comes on. The display

shows the duration of the programme.

3. Set a programme.

•

If you want to start the

pro-

gramme, close the appliance door.

• If you want to set a different pro-

gramme, press the button of the pro-

gramme you want to set. The display

shows the duration of the programme.

4. Close the appliance door. The pro-

gramme starts. The programme duration

starts to decrease with steps of 1 minute.

Starting a programme with delay start

1. Set the programme.

2.

Press

again and again until the dis-

play shows the delay time you want to

set (from 1 to 24 hours).

• The display shows intermittently the

programme duration and the delay

time.

•

The

indicator comes on.

3. Close the appliance door. The count-

down starts.

• When the countdown is completed,

the programme starts.

Opening the door while the appliance

operates

If you open the door, the appliance stops.

When you close the door, the appliance

continues from the point of interruption.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 79 80

Comments to this Manuals

No comments