IKEA RENLIGWM User Manual download pdf (Page 20)

1

2

When no more water

comes out, unscrew

the filter cover and

remove it. Always

keep a rag nearby to

dry up spillage of

water when removing

the filter.

Remove any objects

from the filter impeller

by rotating it.

Use a pencil to check

whether the filter

wheel right at the

back of the filter

housing can turn. (It is

normal for the filter

wheel to turn jerkily.)

If the filter wheel

cannot be turned,

please contact the

Authorised Service

Centre.

1

2

Put the cap back on

the emergency

emptying hose and

place the latter back

in its seat. Screw the

filter fully in.

Cleaning the inlet filter and the filter valve

If the appliance takes long to fill with water

or doesn't fill, the starting button indicator

flashes in red. Check if the water inlet filter

and the valve filter are blocked (see

chapter "Troubleshooting" for more details).

Proceed as follows:

• Turn off the water

tap.

• Unscrew the hose

from the tap.

• Clean the filter in

the hose with a stiff

brush.

• Screw firmly the

inlet hose back

onto the tap.

• Unscrew the hose from the appliance.

Keep a rag nearby because some water

may flow.

• Clean the filter in the valve with a stiff

brush or with the piece of cloth.

35°

45°

• Screw the hose

back to the

appliance turning

it to the left or the

right to suit the

installation. Tight

the locknut

correctly to

prevent water

leaks.

• Turn on the water tap.

The dangers of freezing

If the appliance is installed in a place where

the temperature could drop below 0°C,

proceed as follows to remove any water

remaining inside the appliance:

• unplug the appliance;

• turn off the water tap;

• place the end of the emergency

emptying hose and that of the inlet hose

ENGLISH

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments