IKEA FROSTKALL User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Problem Possible cause Solution
The compressor does not
start immediately after
pressing Fast Freezing, or
after the change of the tem-
perature.
This is normal, no error has
occurred.
The compressor starts after
some time.
The compressor does not
start immediately after
pressing Shopping Function,
or after the change of the
temperature.
This is normal, no error has
occurred.
The compressor starts after
some time.
Water flows inside the re-
frigerator.
Food products prevent
water from flowing into the
water collector.
Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the
compressor.
Attach the melting water outlet
to the evaporative tray.
Temperature cannot be set. The Shopping Function is
switched on.
Switch off Shopping Function
manually, or wait until the
function resets automatically
to set the temperature. Refer
to " Shopping Function".
Temperature cannot be set. The Fast Freezing function
is switched on.
Switch off Fast Freezing func-
tion manually, or wait until the
function resets automatically
to set the temperature. Refer
to "Fast Freezing function".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the Mode pressed for
approximately 10 seconds un-
til a long sound is heard and
display shuts off for a short
time.
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The temperature in the ap-
pliance is too low/too high.
The door is not closed cor-
rectly.
Refer to "Closing the door".
ENGLISH 23
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Comments to this Manuals

No comments