IKEA BITANDE User Manual download pdf (Page 14)

Problem Possible cause Solution

The room temperature is too

high.

Decrease the room tempera-

ture.

Water flows on the rear

plate of the refrigera-

tor.

During the automatic defrost-

ing process, frost defrosts on

the rear plate.

This is correct.

Water flows into the re-

frigerator.

The water outlet is clogged. Clean the water outlet.

Products prevent that water

flows into the water collector.

Make sure that products do

not touch the rear plate.

Water flows on the

ground.

The melting water outlet does

not flow in the evaporative

tray above the compressor.

Attach the melting water outlet

to the evaporative tray.

The temperature in the

appliance is too low/

high.

The temperature regulator is

not set correctly.

Set a higher/lower tempera-

ture.

If your appliance is still not working proper-

ly after making the above checks, contact

the After Sales Centre. You can find the list

at the end of this manual.

Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

Only service is allowed to replace the light-

ing device. Contact your Service Center.

Closing the door

1. Clean the door gaskets.

2. If necessary, replace the defective door

gaskets. Contact the After Sales Service.

Technical data

Dimensions of Instal-

lation

Height 1780 mm

Width 560 mm

Depth 550 mm

Net Volume

Fridge 210 Litre

Freezer 58 Litre

Defrost System

Fridge auto

Freezer auto

Star Rating

Rising Time 21 hours

Freezing Capacity 4 kg/24h

Energy Consumption 0,846 kWh/24h

Noise Level 40 dB (A)

Energy Class A+

Voltage 230–240

Frequency 50 Hz

ENGLISH 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments