IKEA HJÄLPSAM User Manual download pdf (Page 13)

3

A

4

5

If the programme

has a prewash

phase, put a small

quantity of

detergent in on the

inner part of the

appliance door.

When you use multi-tablets, that contain

salt and rinse aid, is not necessary to fill the

salt container and the rinse aid dispenser.

• Adjust the water softener to the lowest

level.

• Set the rinse aid dispenser to the lowest

position.

What to do if you want to stop using multi-

tablets

Before you start to use detergent, salt and

rinse aid separately do the following

procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according to

the water hardness in your area.

5. Adjust the released quantity of rinse aid.

Setting and starting a programme

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press the programme button repeatedly

until the indicator of the programme you

want to select comes on.

4. Close the appliance door to start the

programme.

Opening the door while the appliance

operates

If you open the door while a programme is

running, the appliance stops. When you

close the door, the appliance continues from

the point of interruption.

Cancelling the programme

Press and hold the programme button until

the appliance is in programme selection

mode.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

Comments to this Manuals

No comments