IKEA RENLIGFWM7 User Manual download pdf (Page 22)

surface and dab the stain with the fingertips

and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since

the cellulose structure will already have

been damaged and the fabric tends to

hole.

Mould stains: treat with bleach, rinse well

(white cottons and fast coloureds only).

Grass: soap lightly and treat with bleach

(white cottons and fast coloureds only).

Ball point pen and glue: moisten with

acetone

1)

, lay the garment on a soft cloth

and dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with

bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

1)

, then with

acetic acid; treat any residual marks on

white fabrics with bleach and then rinse

thoroughly.

Tar stains: first treat with stain remover,

methylated spirits or benzine, then rub with

detergent paste.

Degrees of water hardness

Water hardness is classified in so-called

“degrees” of hardness. Information on

hardness of the water in your area can be

obtained from the relevant water supply

company, or from your local authority.

Characteris-

tic

Degrees of water hard-

ness

German

°dH

French °T.H.

Soft 0-7 0-15

Medium 8-14 16-25

Hard 15-21 26-37

Very hard > 21 > 37

A water softener must be added

when water has a medium-high

degree of hardness. Follow the

manufacturer’s instructions. The

quantity of detergent can then

always be adjusted (reduced) to

degree of hardness soft.

Care and cleaning

Warning! Refer to Safety

chapters.

Warning! Switch the appliance

off before you carry out any

cleaning or maintenance work.

1)

do not use acetone on artificial silk

ENGLISH 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Comments to this Manuals

No comments