IKEA SUPERBT User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Problem Possible cause Solution
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance stands
stable (all the four feet should
be on the floor).
The compressor oper-
ates continually.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The door has been opened
too frequently.
Do not keep the door open
longer than necessary.
The product temperature is
too high.
Let the product temperature
decrease to room temperature
before storage.
The room temperature is too
high.
Decrease the room tempera-
ture.
The Fast freezing function is
switched on.
Refer to "Fast freezing func-
tion"
Water flows on the rear
plate of the refrigera-
tor.
During the automatic defrost-
ing process, frost defrosts on
the rear plate.
This is correct.
Water flows into the re-
frigerator.
The water outlet is clogged. Clean the water outlet.
Products prevent that water
flows into the water collector.
Make sure that products do
not touch the rear plate.
Water flows on the
ground.
The melting water outlet does
not flow in the evaporative
tray above the compressor.
Attach the melting water outlet
to the evaporative tray.
There is too much frost
and ice.
Food products are not wrap-
ped properly.
Wrap the food products bet-
ter.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The Temperature regulator
may be set incorrectly.
Set a higher temperature.
The temperature in the
appliance is too high.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The product temperature is
too high.
Let the product temperature
decrease to room temperature
before storage.
Many products are stored at
the same time.
Store less products at the
same time.
ENGLISH 17
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Comments to this Manuals

No comments