IKEA ENASTÅENDE User Manual download pdf (Page 10)

What to do if you want to stop using multi-

tablets

Before you start to use detergent, salt and

rinse aid separately do the following

procedure.

1. Deactivate the Multitab option.

2. Set the highest level of the water

softener.

3. Make sure that the salt and rinse aid

containers are full.

4. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

5. When the programme is completed,

adjust the water softener according to

the water hardness in your area.

6. Adjust the released quantity of rinse aid.

EnergySaver

This option decreases the temperature of

the last rinsing phase and consequently also

the energy consumption (approximately

-25%).

Dishes can still be wet once the programme

is completed.

The duration of the programme will be

shorter.

How to activate EnergySaver

Press , the related indicator comes on.

If the option is not applicable to the

programme, the related indicator does not

come on or it flashes quickly for a few

seconds and then goes off.

The display shows the updated programme

duration.

The EnergySaver option is applicable for all

programmes except for programme number

6, the Rinse programme.

Settings

Programme selection mode and user

mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings can

be changed:

• The level of the water softener according

to the water hardness.

• The activation or the deactivation of the

acoustic signal for end of programme.

• The activation of the rinse aid dispenser

when you want to use the Multitab

option and the rinse aid together.

These settings will be saved until you

change them again.

How to set the programme selection mode

The appliance is in programme selection

mode when the display shows 2 horizontal

status bars.

When you activate the appliance, usually it

is in programme selection mode. However,

if this does not happen, you can set the

programme selection mode in the following

way:

Press and hold RESET until the appliance is

in programme selection mode.

The water softener

The water softener removes minerals from

the water supply, which would have a

detrimental effect on the washing results

and on the appliance.

ENGLISH 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Comments to this Manuals

No comments