IKEA RENLIGFWM User Manual download pdf (Page 12)

Select the available options by pressing

buttons 5, 6 and 7

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the pro-

gramme.

When these buttons are pressed, the corre-

sponding indicator lights illuminate. When

they are pressed again, the indicator lights

go out. If an incorrect option is selected, the

integrated red indicator light of the button 4

flashes for 3 times.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing button

2

Before you start the programme, if you wish

to delay the start, press the button 6 re-

peatedly, to select the desired delay. The

relevant light illuminates.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button 4.

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the

button 2.

3. Press button 4:

– the appliance starts its countdown.

– The programme will start after the

selected delay has expired.

Cancelling the delayed start after having

started the programme:

1. Set the washing appliance to PAUSE by

pressing button 4.

2. Press button 2 once, the light relevant

to the selected delay goes off

3. Press button 4 again to start the pro-

gramme.

The Delay Start can not be selected with

DRAIN programme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The door will be locked throughout the de-

lay time. If you need to open the door, you

must set the appliance to PAUSE (by press-

ing the button 4) and then wait a few mi-

nutes. After you have closed the door, press

the button 4 again.

Start the programme by pressing button 4

To start the selected programme, press the

button 4, the corresponding green indicator

light stops blinking. The indicator light cor-

responding to the running phase illumi-

nates. The appliance starts operating and

the door is locked.

To interrupt a programme which is running,

press the button 4: the corresponding green

indicator light starts blinking.

To restart the programme from the point at

which it was interrupted, press the button 4

again. If you have chosen a delayed start,

the appliance will begin the countdown.

If an incorrect option is selected, the red in-

dicator light of the button 4 blinks 3 times.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out.

Before you make any change, you must

PAUSE the appliance by pressing the button

4.

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to O and then to the new pro-

gramme position. Start the new programme

by pressing the button 4 again. The wash-

ing water in the tub will be not emptied out.

Interrupting a programme

Press the button 4 to interrupt a programme

which is running, the corresponding green

indicator light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to O to cancel a pro-

gramme which is running.

ENGLISH 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments