IKEA RENLIGFWM User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
Problem Possible cause Solution
An option or a programme that
ends with the water still in the tub
or a that eliminates all the spinning
phases has been selected.
Select the draining or spinning
programme.
The appliance
door is open or
not closed cor-
rectly.
Close the door firmly.
The appliance
does not start:
The plug is not properly inserted in
the power socket.
Insert the plug into the power
socket.
There is no power at the socket. Please check your domestic electri-
cal installation.
The main fuse or the fuse in a plug
has blown.
Replace the fuse.
The programme selector dial is not
correctly positioned and the button
5 has not been pressed.
Please turn the selector dial and
press the button 5 again.
The delay start has been selected. If the laundry are to be washed
immediately, cancel the delay
start.
The Child Lock function is activa-
ted.
Deactivate the Child Lock function.
The appliance
switches off
during the
washing phase:
The mains supply has been cut off. Wait for the electricity restore.
The appliance will start again from
the same interrupted washing
phase.
The appliance
spinning phase
starts late or
does not start:
The electronic unbalance detection
device has cut in because the laun-
dry is not evenly distributed in the
drum. The laundry is redistributed
by reverse rotation of the drum.
This may happen several times be-
fore the unbalance disappears
and normal spinning can resume.
If, after 10 minutes, the laundry is
still not evenly distributed in the
drum, the appliance will not spin.
Redistribute the load manually or
load more laundry and select the
spin programme.
There is water
on the floor:
Too much detergent or unsuitable
detergent (creates too much foam)
has been used.
Reduce the detergent quantity or
use another one.
ENGLISH 27
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comments to this Manuals

No comments